LF-CF18 New Qi Dual Coil 10W Wireless Fast Charging
Input: 5V=2A 9V=1.67A
Output: 5.0V/1.5A 9V/1.35A
Line length: 1M Conversion rate:>73%
Material: ABS environmentally friendly material product
Size: Height 120 * Width 80 * Length 100mm
Color: Black/Red/Blue/Gold
Chip: imported
Input: 5.0V/2A9.0V/1.67A
Output: 5.0V/1.5A9.0V/1.35A
Charging distance: 2-10MM Conversion rate:>73%
Charging frequency: 110-205KHZ Executive standard: QI wireless charging standard
characteristic
ABS fireproof material
True resistance to falling and high humidity
Dual heat dissipation mesh
True heat dissipation without burning
Silicone gasket
True anti slip and non falling
Early entry into the wireless era
2.8 hours full
No injury/machine damage/no burning
2023-11-02
Product description
LF-A80 is an internationally leading and cost-effective three in one wireless charging solution that achieves efficient wireless transmission
Can; Conversion efficiency up to 80%, maximum transmission distance up to 5mm, support for Apple 12 phone pop-up, support for 5W/7.5W/10W/15W
Wireless charging, supporting PD and QC3.0 protocol fast charging adapter, can charge all wireless charging phones that meet QI standards. This product
Can simultaneously charge mobile phones, Apple headphones, and Apple watches.
Technical parameters
Charging method: electromagnetic induction
Input voltage and current: 9V/3A
Double coil wireless charging output power: 5W 7.5W 10W 15W
Apple earphone wireless charging output common rate: 3W (maximum) (test bench test 5W)
Apple watch wireless charging output power: 1-2W
Maximum total output power of the entire machine: 22W
No load power consumption:<1W
Effective transmission distance:<5mm
Conversion efficiency:<80%
Operating frequency: 105~205KHz
Protection measures: foreign object detection, over temperature protection, over current protection, under voltage protection, short circuit protection, over voltage protection
High conversion efficiency and cost-effectiveness
Product modet: JJT-A80 Charging mode: electromagnetic induction
Input voltage current: 9V/3A
Dual coil wireless charging output power :5W 7.5W 10W 15W
Apple earphone wireless charging output common rate: 3W(Max)
Apple Watch wireless charge output: 1 - 2W
The maximum total output power of the machine:22W
No-load power consurmption: <1W Effective transmission distance: <5mmConversion efficiency:<80% Operating frequency: 105-205KHz
Protection measures: foreign body detection, over temperature protection,over current protection, under voltage protection,Short circuit protection, avervoltage protection
2023-11-01
Basic parameters
Basic Parameter "Earphone size (mm) L * H=55.2 * 25.8mm
Weight Earphone: 2 * 18g+Charging: 80g
Color: Available in four colors: black, orange, white, and pink;
Major function "Bluetooth calls, Bluetooth music,
Supports SBC, AAC code music[
Hardware parameter Bluetooth chip manufacturer (Chipset Supplier) Jerry
Chipset AC7006F4
Compatible System IOS and Android
FLASH memory N/A
Amplifier board amplifier N/A
Connection parameter BT BT5.3
WIFI N/A
NFC N/A
Speaker/microphone speaker model f15.4 inch speaker/15.4 DRIVERS
Microphone model silicone label
Battery
Battery Type Polymer Lithium
Capacity earphones: dual 65mAh, charging compartment: 400mAh
Charging Method Type-c charging, earphone magnetic suction charging
Process material: charging compartment+earphone body: ABS/earhook: silicone+steel wire
Other parameters
Other Partmeter "Waterproof Level IPX4
Charging time about 90 minutes
Life time 60% volume IOS, as long as 6 hours
Product language English
Appearance material ABS
2023-11-01
specification
1
Basic ParameterEarphone size
Earphone size
L*W*H= 116*109*46mm
Weight
18g
Color
black.green.orabge
Major function
bluetooth calls,music,
supprot SBC,AAC code music.
2
Hardware parameter
Chipset Supplier
Chipset
AB5656B2
Compatible System
IOSandroid
FLASH memory
N/A
amplifier
N/A
3
Connection parameter
BT
BT5.3
WIFI
N/A
NFC
N/A
4
Speaker/microphone
speaker
f14speker /14 DRIVERS
microphone
FH2718T(full direction microphone)
5
Battery
Type
polymer lithium
Capacity
90mAh
Charging Method
Type-c
6
technology
material
subject ABS,Titanium nickel memory steel wire for hanging rope
7
Other Partmeter
Waterproof Level
IPX4
Charging time
about 90 minutes
Life time
60% volume IOS, as long as 10 hours
Product language
English
Appearance material
ABS
8
Package Size
Packaging box size(L*W*H)MM
Tiandi Gai
15×13x5cm
pakeage weight(g)
100g
carton size(L*W*H)CM
590*375*400mm
outer box weight(KG)
8.5kg
packing quantity(platform)
60
2023-10-30
Product description
ProductInformation
Model: A77
Battery capacity:10000mAh
Color: black, silver, gray, purple
Protection circuit: Yes
Material: PC+ABS
Size: 104*68*19mm
Compatibility: 99% smartphonesand tablets
Output: 22.5W+15W wireless
charging
Magnetic suction+wiredPower Bank2-in-1
LED intelligent digital display
22.5W Super Fast Charge
15W magnetic suctionwireless charging
PD 20W bidirectionalfast charging
25
Mobile phone holdervertically and horizontally rechargeable
1. Standby state (sleep state):
In standby mode, briefly press the button once, and the nixie tube will display the current percentage of electricity. At the same time, the boost circuit will work and the output will be turned on. If there is no load for 40 seconds
Turn off the left and right digital tubes and turn off the output, and the entire machine enters standby mode;
2. Charging status (display current battery percentage)
A. When the TYPE-C port is connected to an external power source, the digital tube displays the current battery level and flashes to indicate charging. After fully charging, the digital tube displays 100%.
3. Power on status (display current battery percentage, start boost output):
A. After pressing the button, the nixie tube displays the current percentage of battery power. If there is no load or the load is less than the maintenance current of 50mA (+/-30mA), at a certain time
After the boost is turned off, the digital tube goes out and enters a sleep state. If the load is greater than 50mA (+/-30mA) or above, please refer to "Discharge Status" for details.
4. Discharge state, load greater than 50 mA (+/-30mA):
A. Single port output supports fast charging.
B. Multiple ports output simultaneously, does not support fast charging.
2023-10-30
Product Parameters
brand
Lu Feng/LUFNG
name
CPU heat sink
Fan size
120 * 120 * 25mm
support
Intel/AMD Universal
Air volume
48CFMMin
bearing
Hydraulic bearings
voltage
12V DC
current
0.23 ± 10% A
speed
1000-2000RPM10 (4-pin plate) 2000RPM ± 10% (3-pin plate)
Socket
Motherboard with three or four pins available
noise
18-20dB (A) Mute
power
With light 4~6W
life
50000 hours
2023-10-26
Product parameters
Brand: LUFNG
Name: CPU heat sink
Air volume: 48CFMMin
Fan size: 120 * 120 * 25mm
Support: Intel/AMD Universal
Voltage: 12V DC
Bearings: hydraulic bearings
Current: 0.23 ± 10% A
Speed: 800~1800RPM ± 10% (4 needles) 1500RPM ± 10% (3 needles)
Socket: motherboard with three or four pins available
Noise: 18-20dB (A) Mute
Power: 4~6W with light
Life: 50000 hours
FIN technology for penetrating 6 pure copper heat pipes
Efficient heat dissipation of tower type sheet group
The heat generated by the CPU is transmitted through pure copper heat pipes to a large area of vinegar flakes to disperse the heat, and the fan blows in cold air to remove the heat from the flakes
2023-10-24
Product specification parameters
Anti freezing -38C non-conductive water-cooled liquid
Water discharge
Water discharge size: 274 * 120 * 27mm
Appearance/Function: Black/12 Waterway
Material: Aluminum
Fan
Fan size: 120 * 120 * 25mm
Fan speed: 800-2000+/-10%
Air volume: 30-75CFM
Bearings: Hydraulic
Control: 4pin (PWM)+3pin RGB
Input voltage: DC12V
Noise: 25-32dBA
water pump
Platform: Intel: LGA2066/2011V3/2011/115X/1700AMD: AM5/AM3+/AM3/FM2+/FM2
Size: 69 * 69 * 96mm
Speed: 2200+/-10%
Input voltage: DC12V
Noise: 23dBA
2023-10-24
Product description
Product specification parameters
Product size: 123X123X63MM Fan size: 90X90X25MM
Fan speed: 2000PRM ± 10% Interface: 3PIN
Bearing type: hydraulic bearing
Noise: 23DBA ± 10%
Rated voltage: 12V.DC
Air volume: 38CFM
Expected life: 40000H
Rated current: 0.2A
Downblow design for effective heat dissipation
The down blowing design can effectively reduce the CPU temperature and take away the hardware temperature around the motherboard, suitable for CPUs with power not exceeding 95W
Faster heat dissipation during compaction process
Each thread piece is polished by side pressure, and the heat transfer loss between each thread piece is greatly reduced by using a pressing process to stack and tightly contact each other, achieving rapid heat dissipation
2023-10-23
Product parameters
Brand: LUFNG
Support: Intel/AMD Universal Design
Fan: 120 * 120 * 25mm 90 * 90 * 25mm
Bearings: hydraulic bearings
Air volume: 48CFMMin
Voltage: 12V DC
Current: 0.23 ± 10% A
Speed: 1600RPM ± 10% cm 2000RPM ± 10% cm
Power: with lamp 4-6 W
Life: 50000 hours
Noise: 18-20db (A) Mute
Socket: motherboard with three or four pins available
2023-10-23